Bifacial High Power Dual Cell PERC Module

• 

• Bifacial module up to 550 W

  · 182 mm wafer + 144 dual cell + PERC technology · Front side power up to 550 W · 29.5 % more energy yield in the lifetime
• 

  Lower BOS cost and LCOE

  · 12.3% LCOE reduction because of higher energy yield and lower system cost · Compatible with mainstream trackers
• 

  Enhanced reliability

  · Up to 50% lower degradationLID / LeTID mitigation · Lower hot spot temperature · Better shading tolerance

Bifacial High Power Dual Cell PERC Module

• 

• Bifacial module up to 665 W

  · 210 mm wafer + 132 / 120 dual cell + PERC technology · Front side power up to 665 W · 25.7% more energy yield in the lifetime
• 

  Lower BOS cost and LCOE

  · 8.9% LCOE reduction because of higher energy yield and lower system cost · Compatible with mainstream trackers and inverters
• 

  Enhanced reliability

  · Up to 50% lower degradation LID / LeTID mitigation · Excellent hot spot performance · Better shading tolerance

• 

• High Power

  · Module power up to 610W，module efficiency up to 22.6%, bifaciality up to 85% · No boron-oxygen LID and anti PID, less degradation · 16BB cell technology, better light trapping and current collection, higher power output
• 

  High energy yield, low LCOE

  · Low temperature coefficient (Pmax): -0.29%/℃, more energy in hot climate · 2% higher energy generation than PERC · About 2.3% lower LCOE than PERC
• 

  Enhanced reliability

  · Minimize the micro-crack impacts to module · Snow loads up to 5,400Pa, wind loads up to 2,400Pa

N-type TOPCon Bifacial Module

• 

• Bifacial module up to 700W

  · 210 mm wafer 132/120 dual cell N-type TOPCon technology · Front side power up to 700W · Up to 85% power bifaciality, more power from the back side
• 

  Higher energy yield, lower LCOE

  · Low temperature coefficient (Pmax): -0.29%/℃, more energy in hot climate · 2% higher energy generation than PERC · About 2.3% lower LCOE than PERC
• 

  Enhanced reliability

  · Minimize cell micro-crack impacts to module · Snow loads up to 5,400Pa, wind loads up to 2,400Pa

Solis-(215-255)K-EHV-5G

800V: 215K-PLUS/255K/255K-PLUS

215-255kW three-phase series string inverter have Maximum 28 strings input, support "Y" type connection in DC side. Maximum string input current 15 A, support bifacial modules access. Supports anti-PID function to improve system efficiency. High-precision intelligent strings monitoring reduces fault location time.

215-255kW Three Phase Inverter

Leading Features

• > 150% DC/AC ratio
• Night SVG function
• IP66
• DC side supports "Y" connector
• 9/12/14 MPPTs, max. efficiency 99.0%
• High power tracking density 55MPPT/MW
• Compatible with 500W+ bifacial modules
• Power line communication (PLC) (optional)
• Fuse free design, safe and maintenance free
• Remote firmware upgrade with simple operation
• Supports aluminium wire access to reduce co
• Intelligent string monitoring, smart I-V curve scan
• Built-in PID recovery for better module performance
• Globally recognised branded componentry for longer life

Solis-Mini(700-3600)-4G

220V: 700W/1000W/1500W/2000W/2500W/3000W/3600W

Solis-Mini-4G Single-phase series string inverter are green power leader in affordable small residential and commercial rooftops, adopt full digital control technology, advanced topological structure and accurate MPPT algorithm, whose efficiency higher than the industry's leading conversion is up to 97.5% at the maximum.Meanwhile adopt multiple protection functions,ultra-high switching frequency technology.

Solis 4G Mini Series Inverter

Leading Features

• 97.5% Max. efficiency
• Precise MPPT algorithm
• Super high frequency switching technology
• Wide voltage range and low startup voltage
• Intergrated Export Power Manager (EPM)
• Compact and lightweight
• Friendly and adaptable connection to the grid

S6-EH1P8K-L-PRO series hybrid inverter with many excellent features, first, Up to 32A of MPPT current input to support 182mm/210mm solar panels; Supports 6 customized charge and discharge time set with defined charging source, more friendly for battery. And can support multiple parallel machine to form single-phase or three-phase system, the maximum power of 48kW. With UPS level switching time (< 4 ms), 190A charge-discharge current, provides higher energy throughput density. Intelligent and reliable ，which is the preferred product of residential PV energy storage and small commercial PV energy storage.

Energy Storage Inverters

Leading Features

• Automatic UPS switching
• Up to 190A max charge/discharge current
• 6 customisable charge/discharge time settings
• 10 second 200% surge power backup overload capability
• Supports 1ph and 3ph flexible connection with max 48kW in parallel
• Supports peak shaving control in both "self-use" and "generator" mode
• Generator connectivity with multiple input methods and automatic generator On/Off control
• Compatible with lead-acid and lithium batteries, with multiple battery protection features

3K/3.6K/4.6K/5K/6K

S5-EH1P(3-6)K-L series energy storage inverter is designed for residential PV energy storage system. 5kW backup power supports more critical loads. Backup switching time is less than 20ms. Integrate multiple protections and fault monitoring to ensure the safety of batteries and equipment.

Hybrid Energy Storage Inverter

Leading Features

• Max. string input current 15A
• Fanless design, long lifespan
• Uninterrupted power supply, 20ms reaction
• 5kW backup power to support more important loads
• AFCI protection, proactively reduces fire risk
• Intelligent EMS function, improving battery's reliability
• Higher charge-discharge efficiency, improving the economic benefits
• Multiple working modes to make maximize self-consumption, increase benefit
• 24-hour fully intelligent energy management, Real-time grasp of PV plant status
• Compatible with lithium & lead-acid batteries, increased more choice in different markets
• Remotely control & upgrade function, making digital power plant maintenance at your fingertips

3K/3.6K/4.6K/5K/6K

Solis energy storage inverter is a good choice for on/ off-grid integrated storage solutions 1. Higher incomes: select the electricity consumption mode in real time according to the market price; 2. High independence: can be operated out of the power grid; 3. Higher efficiency: International leading brand components provide higher efficiency; 4. Perfect switch: it's less than 20ms from the grid

Hybrid Energy Storage Inverter

Leading Features

• Uninterrupted power supply, 20ms reaction
• 5kW backup power to support more important loads
• Fanless design, long lifespan
• Intelligent EMS function, improving battery's reliability
• Higher charge-discharge efficiency, improving the economic benefits
• Multiple working modes to make maximize self-consumption, increase benefit
• With high-frequency isolation technology, making system safer and long lifespan
• 24-hour fully intelligent energy management, Real-time grasp of PV plant status
• Remotely control & upgrade function, making digital power plant maintenance at your fingertips

5K/6K/8K/10K

S6 Solar inverter that can connect solar panels and a high voltage battery. This inverter will capture the solar during the day and provide power to your home loads and charge the battery. At night it will use the battery to satisfy your home loads. This will prevent you from using any power from the grid and save you from ever paying them a cent! Fight back with the new S6 solar hybrid inverter from Solis.

Energy Storage Inverter

Leading Features

• Integrated 3 to 4 MPPTs, suitable for residential rooftop installations with multiple array orientations
• Supports Unbalanced and Half-Wave Loads on the Grid Port and on the Backup Port
• Compatible with multiple brands of battery models giving customers multiple battery options
• Controllable and Upgadeable via the SolisCloud App to avoid site visits
• Multiple working modes to meet different use case scenarios
• Supports pure off grid applications with generator communication support
• Safety protection with integrated AFCI function, which actively detects arc faults in the PV Array
• Natural convection design without external fans
• Up to 16A of MPPT current input to support 182mm/210mm solar panels
• Supports 1.6 DC:AC ratio to connect more PV capacity to the energy storage system
• UPS level switching time (<10ms) supporting critical loads all the time
• High PV charge efficiency to prevent excess PV loss
• Up to 50A/10kW max charge/discharge rating with industry highest level 10kW of backup loads support capability

5K/6K/8K/10K

UPS function, Less than 40ms reaction, does not affect the power supply of important loads; 24 hours solar energy use; save money up to zero cost; Optional 24-hour load consumption monitoring solutionfanless design, long lifespan; Easy monitor setup via remote APP settings; Regulate peak and valley electricity consumption, low-cost charging at night, and high-priced electricity sales at daytime; Easy O & M, remotely control and upgrade any selected inverter, making digital power plant maintenance at your fingertips.

Hybrid Energy Storage Inverter

Leading Features

• Max. efficiency 98.4%%
• Intelligent EMS function
• Support three-phase imbalance on backup output port
• 2 MPPT and 4 DC input; Max 26A DC input current
• Time of use shifting and peak shaving capabilities to grid
• AFCI protection, proactively reduces fire risk
• Remotely control and upgrade any selected inverter
• Power supply can be switched automatically and switching time within 40ms
• Ensures AC backup for up to 10kW of continuous power and 16kVA of peak power
• 24-hour fully intelligent energy management system for monitor production and consumption
  • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • three operating modes (self-consumption; time-of-use; off-grid back-up) & programmable energy management

4K/4K-P/5K/5K-P

S5-EO1P(4-5)K-48 series off-grid inverter is designed for areas without power grids or areas with frequent power outages. It supports parallel operation up to 10 units, system up to 50kW. Exquisite appearance and compact structure make installation more convenient. Integrate multiple protections and fault monitoring to ensure the safety of batteries and equipment.

nergy Storage Inverter

Leading Features

• Integrated LCD Display
• Built-in bluetooth for mobile monitoring
•  Intelligent EMS function
• One-Click fast charging mode
• Remote control & firmware upgrade
• Work with battery or without battery
• Maximum PV input voltage up to 500VDC
• Built-in MPPT solar charge controller
• AC charger up to 80A and solar charger up to 100A
• Single phase parallel operation up to 10 units (50kW)
• Configurable AC/Solar input priority based on applications
• Battery equalization for optimized battery performance and lifecycle
• Manual wakeup the overdischarged battery to extend battery lifespan
• Compatible with multiple brands of Lithium battery and lead-acid battery

RAI-3K-48ES-5G

Solis energy storage inverter is a good choice for on/ off-grid integrated storage solutions 1. Higher incomes: select the electricity consumption mode in real time according to the market price; 2. High independence: can be operated out of the power grid; 3. Higher efficiency: new components provide higher efficiency;

Energy Storage Inverter

Leading Features

• Off -grid backup function
• EPS function
• Intelligent EMS function
• Natural cooling without external fan
• Uninterrupted power supply, 20ms reaction
• Various work mode for diff erent application scenario
• Compatible with both lead-acid battery and li-ion battery
• Compatible with any existing grid-tied PV system, option to upgrade
• Intelligent debugging APP which support one-click inverter configuration

S6-GR1P(0.7-3.6)K-M

220V: 0.7K/1K/1.5K/2K/2.5K/3K/3.6K

S6-GR1P(0.7-3.6)K-M series inverter is designed for residential PV plants. The maximum input current per string is 14A, which is compatible with high-efficiency modules and bi-facial modules. Compact and lightweight design, make it easy to install. Fanless design, lower noise, brings you a comfortable living environment. Integrated AFCI function can proactively reduce the risk of fire.

Solis Mini Series Inverter

Leading Features

• Max. efficiency 97.3%
• String current up to 14A
• Precise MPPT algorithm
• Compact and lightweight
• Intergrated Export Power Manager (EPM)
• Super high frequency switching technology
• Wide voltage range and low startup voltage
• AFCI protection, proactively reduces fire risk
• Friendly and adaptable connection to the grid

S6-GR1P(2.5-6)K

2.5K/3K/3.6K/4K/4.6K/5K/6K

S6-GR1P(2.5-6)K series inverter is designed for residential PV plants. The maximum input current per string is 14A, which is compatible with high-efficiency modules and bi-facial modules. Compact and lightweight design, bring easy installation. The protection level is increased to IP66. Integrated AFCI function can proactively reduce the risk of fire.

2.5-6kW Single Phase Inverter

Leading Features

• Max. efficiency 97.7%
• String current up to 14A
• Super high frequency switching technology
• Wide voltage range and low startup voltage
• 2 MPPT design with precise MPPT algorithm
• Intergrated Export Power Manager(EPM)
• AFCI protection, proactively reduces fire risk
• Compact and lightweight
• Friendly and adaptable connection to the grid

Solis-1P(2.5-6)K-4G

2.5K/3K/3.6K/4K/4.6K/5K/6K

2.5-6kW Single-phase series string inverter's efficiency of has improved dramatically.Solis-1P(2.5-6)kW-4G series are suitable for the installation of single-phase input pv system of different types, residential,commercial and industrial and adopt ultra-high switching frequency, ultra-thin single four-layer board design can greatly reduce the risk caused by the connector.

2.5-6kW 4G Single Phase Inverter

Leading Features

• Over 98.1% Max. eff ciency
• Super high frequency switching technology
• Wide voltage range and low startup voltage
• Dual MPPT design with precise MPPT algorithm
• Intergrated Export Power Manager(EPM)
• Compact and lightweight
• Friendly and adaptable connection to the grid

S5-GC(100-110)K-SA

400V: 100K/110K;

S5-GC(100-110)K-SA three phase series string inverter adopt 10 MPPT design to provide a more flexible configuration scheme with a smaller environmental impact rate and higher generation efficiency. Anti-resonance, supporting over 6MW parallelled in one transformer, Strings intelligent monitoring, Smart I-V Curve Diagnosis supported.

100-110kW Three Phase Inverter

Leading Features

• 10 MPPTs, max. efficiency 98.7%
• > 150% DC/AC ratio
• Night SVG function
• DC side supports "Y" connector
• High power tracking density 90MPPT/MW
• Power line communication (PLC) (optional)
• Remote firmware upgrade with simple operation
• AFCI protection, proactively reduces fire risk
• Type I SPD for DC (standard) and AC (optional)
• Supports aluminium wire access to reduce cost
• Intelligent string monitoring, smart I-V curve scan
• Globally recognised branded componentry for longer life
• Built-in PID recovery for better module performance (optional)
• String current up to 16A, perfectly match large current bifacial modules
• Overvoltage load reduction and leakage current suppression technology, low failure rate

Solis-3P(3-20)K-4G

3K/4K/5K/6K/8K/9K/10K/12K/15K/17K/20K

Solis-3P(3-20)K-4G three-phase series string inverter are reliable preferred equipment for residential, small industrial and commercial pv stations. Smaller size, higher efficiency, a variety of power models Available for selection. Adopt two MPPT access, more flexible and efficient.

3-20kW Three Phase Inverter

Leading Features

• Max. efficiency 98.7%
• Multiple protections levels
• Wide voltage range and low startup voltage
• 2 MPPT design with precise MPPT algorithm
• THDi<1.5%, low harmonic distortion against grid
• Intergrated Export Power Manager(EPM)

S5-GR3P(3-20)K

3K/4K/5K/6K/8K/9K/10K/12K/15K/17K/20K

S5-GR3P(3-20)K three-phase series string inverter are reliable preferred equipment for residential, small industrial and commercial pv stations. Smaller size, higher efficiency, a variety of power models Available for selection. Adopt two MPPT access, more flexible and efficient.

3-20kW Three Phase Inverter

Leading Features

• Max. efficiency 98.7%
• String current up to16A
• Wide voltage range and low startup voltage
• AFCI protection, proactively reduces fire risk
• Supports export power control
• Supports RS485, WiFi, GPRS
• Scan to register on SolisCloud, supports remote upgrade and control
• Automatic voltage stabilization technology in weak gridconditions
• Compact design, simple installation and maintenance
• Supports high power modules for lower installation costs
•  > 150% DC/AC ratio
• IP66

Solis-(25-50)K-5G

400V: 25K/30K/33K/36K/40K;   480V: 40K-HV/50K-HV

25-50kW three-phase series string inverter adopt 3/4 MPPT desigh to provide a more flexible configuration scheme with a smaller environmental impact rate and higher generation efficiency. Whose operation is so quiet, like a whisper, thus creating a more comfortable and friendly working and living environment.

25-50kW Three Phase Inverter

Leading Features

• Max. efficiency 98.8%
• DC input reverse alarm
• Wide voltage range and low startup voltage
• 3/4 MPPT design with precise MPPT algorithm
• THDi<3%, low harmonic distortion against grid
• Perfect commercial site monitoring solution
• Anti-resonance, supporting over 6MW parallelled in one transformer
• Strings intelligent monitoring, Smart I-V Curve Diagnosis supported
• Fuse free design to avoid fire hazard
• Type II surge arrester for both DC and AC
• Natural convection, Fan-less design, longer lifespan
• Leakage current repression technology
• Volt-watt work mode integrated
• Intergrated Export Power Manager (EPM)

S5-GC(25-40)K

400V: 25K/30K/33K/36K/40K;

S5-GC(25-40)K three-phase series string inverter adopt 3/4 MPPT design to provide a more flexible configuration scheme with a smaller environmental impact rate and higher generation efficiency. Whose operation is so quiet, like a whisper, thus creating a more comfortable and friendly working and living environment.

Features

• Max. efficiency 98.7%
• IP66
• > 150% DC/AC ratio
• String current up to 16A
• Supports RS485, WiFi, GPRS
• Supports export power control
• Intelligent redundant fan-cooling
• Natural convection, Fan-less design
• Wide voltage range and low startup voltage
• Supports aluminium wire access to reduce cost
• AFCI protection, proactively reduces fire risk
• Intelligent string monitoring, smart I-V curve scan
• Natural convection, Fan-less design, longer lifespan
• Globally recognised branded componentry for longer life
• Supports high power modules for lower installation costs
• 3/4 MPPT design, supports multiple orientation system design
• Night time PID recovery function, increases overall system yield (optional)
• Scan to register on SolisCloud, supports remote upgrade and control
• Supports GPRS/WiFi communication with less wiring and reduced installation costs

Solis-(40-60)K-FB

400V: 40K/50K/60K-4G;   480V: 50K-HV/60K-HV

40-60kW three-phase series string inverter are suitable for the installation of three-phase input pv system of commercial and industrial PV plants. WhoseTHDi˂3, low harmonic distortion against grid. Adopt anti-resonance, signle transformer can connect 6M+ in parallel. Perfect commercial site monitoring solution, intelligent redundancy fan.

40-60kW Three Phase Inverter

Leading Features

• Max. efficiency 99%
• Intelligent redundant fan-cooling
• Wide voltage range and low startup voltage
• Perfect commercial site monitoring solution
• 4 MPPT input, each rated current is 24A/36A, compatible with high power module
• THDi<3%, low harmonic distortion against grid
• Anti-resonance, Supporting over 6MW parallelled in one transformer

S5-GC(50-60)K

400V: 50K/60K

S5-GC(50-60)K three-phase series string inverter are suitable for the installation of three-phase input pv system of commercial and industrial PV plants. Adopt 5/6 MPPT design to provide a more flexible configuration scheme and higher generation efficiency. Perfect commercial site monitoring solution, intelligent redundancy fan.

50-60K Three Phase Inverter

Features

• Max. efficiency 98.7%
• String current up to 16A
• Night SVG function
• Supports export power control
• IP66
• Intelligent redundant fan-cooling
• DC side supports "Y" connectors
• Supports aluminium wire access to reduce cost
• AFCI protection, proactively reduces fire risk
• 10/12 string inputs allow for 150%+ DC oversizing
• Intelligent string monitoring, smart I-V curve scan
• Globally recognised branded componentry for longer life
• 5/6 MPPT design, supports multiple orientation system design
• Integrated PID recovery function, increases overall system yield
• Scan to register on SolisCloud, supports remote upgrade and control
• Supports GPRS/WiFi communication with less wiring and reduced installation costs

Solis-80K-5G

400V: 80K

80kW three-phase series string inverter adopt 9 MPPT design to provide a more flexible configuration scheme with a smaller environmental impact rate and higher generation efficiency. Anti-resonance, supporting over 6MW parallelled in one transformer, Strings intelligent monitoring, Smart I-V Curve Diagnosis supported.

80kW Three Phase Inverter

Leading Features

• 9 MPPTs, max. efficiency 98.7%
• > 150% DC/AC ratio
• Compatible with bifacial modules
• Night SVG function
• AFCI protection, proactively reduces fire risk
• Intelligent string monitoring,smart I-V curve scan
• Remote firmware upgrade with simple operation
• Built-in PID recovery for better module performance (optional)
• Globally recognised branded componentry for longer life
• IP66
• DC side supports "Y" connector
• Power line communication (PLC) (optional)
• Supports aluminium wire access to reduce cost

S5-GC-80K

400V: 80K

80kW three-phase series string inverter adopt 9 MPPT design to provide a more flexible configuration scheme with a smaller environmental impact rate and higher generation efficiency. Max. 16A per string, 150% DC overloading capacity，remote and local intelligent IV scan function.

80kW Three Phase Inverter

Leading Features

• 9 MPPTs, max. efficiency 98.7%
• > 150% DC/AC ratio
• Compatible with bifacial modules
• Night SVG function
• AFCI protection, proactively reduces fire risk
• Intelligent string monitoring,smart I-V curve scan
• Remote firmware upgrade with simple operation
• Built-in PID recovery for better module performance (optional)
• Globally recognised branded componentry for longer life
• IP66
• DC side supports "Y" connector
• Power line communication (PLC) (optional)
• Supports aluminium wire access to reduce cost

Solis-(80-110)K-5G-PRO

Solis-(80-110)K-5G-PRO 3-phase series inverter is a new generation of Ginlong 5G models, designed to provide high quality solutions for C&I PV projects. It maximum PV string input current is up to 18A, which can be used for a variety of efficient PV modules, supporting more than 150% DC oversize, High efficiency, Stable and Reliable; Compatible with RS485 / PLC/Wi-Fi/GPRS communication modes, AC/DC interface optimization design, strong cable compatibility, convenient installation, cost saving. Combined with the abundant online O&M tools provided by Solis cloud platform, which can effectively reduce O&M costs and simplify it, improve system efficiency.

80-110kW Three Phase Inverter

Leading Features

• > 150% DC/AC ratio
• Night SVG function
• IP66
• 6/8 MPPTs, max. efficiency 98.5%
• Compatible with bifacial modules
• DC side supports "Y" connector
• Power line communication (PLC) (optional)
• Remote firmware upgrade with simple operation
• AFCI protection, proactively reduces fire risk
• Type I SPD for DC (standard) and AC (optional)
• Supports aluminium wire access to reduce cost
• Intelligent string monitoring, smart I-V curve scan
• Globally recognised branded componentry for longer life
• Built-in PID recovery for better module performance (optional)

Solis-(100-110)K-5G-SA

400V: 100K/110K

100-110kW three-phase series string inverter adopt 10 MPPT design to provide a more flexible configuration scheme with a smaller environmental impact rate and higher generation efficiency. Max. 13A per string, 150% DC overloading capability, remote and local intelligent IV scan function.

100-110kW Three Phase Inverter

Leading Features

• 10 MPPTs, max. efficiency 98.7%
• > 150% DC/AC ratio
• High power tracking density 90MPPT/MW
• Compatible with bifacial modules
• Intelligent string monitoring,smart I-V curve scan
• Remote firmware upgrade with simple operation
• Night SVG function
• AFCI protection, proactively reduces fire risk
• Type I SPD for DC (standard) and AC (optional)
• Built-in PID recovery for better module performance (optional)
• Globally recognised branded componentry for longer life
• Overvoltage load reduction and leakage current suppression technology, low failure rate
• Globally recognised branded componentry for longer life
• Power line communication (PLC) (optional)
• DC side supports "Y" connector
• Supports aluminium wire access to reduce cost

S6-EH1P(3-6)K-L-PRO

3K/3.6K/5K/6K

S6-EH1P(3-6)K-L-PRO series energy storage inverter is designed for residential PV energy storage system，Support multiple parallel machines to form a single-phase or three-phase system with maximum power of 36kW. With UPS level switching time, 10s surge power overload and critical loads. Support 135A Charge and discharge capacity, provide higher energy throughput density. A variety of intelligent protection functions make home power supply safe and secure.